Resultater for

Automotive parts producer - Tyskland

16 Bedrifter

0 Produkter

R+S AUTOMOTIVE GMBH

Tyskland

65 years of experience: Machinery and tools for the automotive industry. Today, R+S Technik is among the market leading manufacturers of tools and machines for the production of interior and exterior parts for the automotive industry. We develop flexible and individual solutions that enable our globally-active partners to produce high-quality interior and exterior parts for cars, vans and lorries.

Nettsted
BILSTEIN & SIEKERMANN GMBH + CO. KG

Tyskland

Competent, efficient and trustworthy. We have been a trusted partner of the automotive and supplier industries since 1956, producing customer-specific locking screws, turned and cold extruded parts that comply to standards. We are a leading supplier in the locking screw industry. From the very beginning, the satisfaction of our global customers has been our top priority. For this reason, we implement the most technologically and economically effective solution for every order and adjust our offer continuously to the requirements of the market. Whether it is automotive, machinery and plant engineering or services, we have the right solution for your industry

Nettsted
SCHAUENBURG INDUSTRIETECHNIK GMBH

Tyskland

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Nettsted
A. G. THORWARTH METALLWARENFABRIK GMBH

Tyskland

We are a highly reliable and efficient supplier of deep-drawn parts with an outstanding sense of quality. A strong track record when it comes to innovation, competitive prices, the use of modern machinery in manufacturing and motivated employees have made us a powerful A-supplier among the supplier industry in accordance with DIN EN ISO 9001: 2015. We are a medium-sized, family-run company with a 143-year-long history in the manufacturing of deep-drawn parts. We specialise in the manufacturing of rotationally symmetric formed parts from all materials that can be deep-drawn, such as Nirosta, brass, steel, copper, aluminium, etc. We predominantly produce supplier parts for the automotive, sanitation and furniture industries. Our machine pool includes 20 automatic progressive forming machines with up to 63 Mp of compressive force.

Nettsted
DGS DRAHTGESTRICKE GMBH

Tyskland

What began with only one employee in 1998 is today a family-owned company in the second generation with about 50 employees. Wire meshes made of metal or plastic are produced at DGS as coils, but we also manufacture wire mesh products such as filters, droplet separators or pressed parts, just the way our customers need it. Environmental technology, process engineering, used air extraction technology or automotive engineering: The operational areas are diverse, and we enjoy working with our customers on new ideas and solutions. Our well-stocked stores, efficient production and our own cleaning of industrial parts make us a fast, flexible and reliable partner.

Nettsted

En side for firmaet ditt

Ser du dette? Dine potensielle kunder også! Bli med oss for å synes på europages.

Legg til firmaet mitt

GERHARD STOLL GMBH & CO. KG

Tyskland

As a family-owned company, at our Pforzheim site, we produce and sell rotating parts, standard parts and semi-finished products in the area of connection, fluid, installation and production technology. Our core competence is the manufacture of rotary parts, including for the automotive, electrical and plastics processing industry. With over five decades of expertise, we are a reliable partner for DIN parts and individual solutions. Our aim is to take the very best care of our customers. This is ensured by continuous and extensive quality management based on the basic principle of continuous improvement. Our products, processes and workflows are permanently put to the test. According to our motto "Quality since 1961", we not only rely on our own expertise, gained from internal training and further training measures and an internal suggestion scheme, but are also involved externally in the area of total quality management .

Nettsted
GEORG MARTIN GMBH

Tyskland

Martin – your partner for precision. We have been producing metallic intermediate layers as well as stamped and deep-drawn parts for the mechanical engineering and plant construction industries for more than 60 years. Our customers come from all important fields of industry, particularly printing machines and the automotive industry, as well as companies in the aerospace sector. Reliability is of key importance for our over 100 employees who meet the highest requirements for precision and quality on a daily basis thanks to their committment, many years of experience and technical expertise. Our products include: Spacers, metal intermediate layers for mechanical engineering, washers, precision stamped parts, stamped parts, metal foils, adhesive steel foils, contract manufacture of mechanical assemblies, engine mounts, laminated shims, 2D laser processing, sheet metal precision assemblies

Nettsted
REICH MIM GMBH

Tyskland

The expertise of Reich MIM GmbH is the production of metal injection moulded parts, or MIM for short. Reich MIM GmbH is located in Schwarzenberg in the German federal state of Saxony. With over 40 employees and a production area of approx. 2200 m², Reich MIM GmbH is a medium-sized company that is entirely family-owned. MIM technology is suitable for components with a high degree of shape complexity that are to be produced without reworking (undercuts, threads). The main areas of application are automotive and mechanical engineering, measurement and control technology, precision mechanics, the lock and fittings industry, tool technology, medical technology and the field of household appliances.

Nettsted
ERNST BRINCK & CO. GMBH

Tyskland

Tubular connectors and aluminium casting direct from the manufacturer We produce our tubular connectors exclusively from high-quality marine weatherproof aluminium alloys with low weight, maximum stability and natural corrosion resistance for a wide range of applications. We would be pleased to plan your individual tubular designs, prepare layout diagrams with parts lists and deliver our tubular connectors together with tube sections, which are marked and customised to your needs. Machine and safety railings from Brinck tubular connectors are TÜV type tested according to pr EN ISO 14122-3. You can also benefit from our experience in aluminium casting and as a system supplier. For over sixty years, we have been producing customer-specific aluminium cast parts as a reliable supplier to the automotive and machinery industries. From conceptualisation to implementation in finished assemblies, we offer you our all-round support.

Nettsted
SCHMALE & SCHULTE GMBH

Tyskland

Our company was founded in 1954. In the early days of the company, fittings were produced by aluminium chill casting. At the start of the 1980s, zinc die-casting became an established part of production. Shortly afterwards, production was expanded to include the field of aluminium die-casting. Our successful company development is still shaped by a balanced relationship between tradition and progress. Today, we supply our discerning customer base across Europe – in industrial and medical technology, mechanical engineering and the automotive, construction and furniture industries – with products made by aluminium die-casting, zinc die-casting and aluminium chill casting. With our core competence in the areas of aluminium and zinc die-casting, as well as aluminium chill casting, our customers receive daily support in producing and supplying ready-to-install casting components.

Nettsted

BRÄUER SYSTEMTECHNIK GMBH

Tyskland

Your qualified and reliable technology partner for automated mechanical engineering. Bräuer Systemtechnik GmbH is a medium-sized company based in south-east Germany. We are known as an experienced and reliable systems supplier in the automotive sector as well as the foodstuff industry and medical technology sector. Our engineering company provides you with ideal pre-requisites for developing and producing high-quality product solutions in the field of resistance welding and conveyor technology. Customised solutions for electrode tip dressing as well as the automation of welding processes are just as much a part of our product range as customised small-scale conveyor systems. For over 10 years, our quality management has been certified in accordance with DIN EN ISO 9001: 2015. In 2016, our environmental management team was also successfully introduced as part of the company and certified in accordance with DIN EN ISO 14001: 2015.

Nettsted
LUDWIG SCHLEICHER ANLAGENBAU GMBH & CO. KG

Tyskland

We have developed and produced machines and systems, and process engineering in connection with automation and robotics, including the entire electrical engineering planning – hardware and software, for more than 30 years. Modular concepts for manufacturing and processing products made of carbon, plastic, composite materials, recycled materials, aluminium and steel, primarily for high-quality interior and exterior parts in the automotive and aviation industries. As a medium-sized company, we have consolidated our expertise into a solid structure through Ludwig Schleicher Anlagenbau GmbH & Co. KG, and Ludwig Schleicher Ingenium GmbH & Co.KG. Our customers worldwide receive the best possible assistance through innovative process engineering advice, reliable completion of tasks, as well as support and service offers throughout the entire product life-cycle, according to the premise: "Everything from a single source – one partner".

Nettsted

MODUS HIGH-TECH ELECTRONICS GMBH

Tyskland

Modus develops, produces and sells automatic optical inspection systems (AOI) for quality control of high-volume manufacturing. The modus inspection systems are available both as inline and offline variants. With an ultra-fast scan speed and full coverage of visible part inspection, modus systems do not affect your cycle time. Modus has plenty of customers in the automotive, industrial and consumer electronics market, which have high expectations of production quality and production reliability. It started over 30 years ago as an engineering office with prior experience in building test equipment, which later became modus, a high-tech company providing German design and development with inspection systems manufactured in-house. Today, there are several thousand inspection systems, the majority of which are scanner-based. This makes modus the European market leader for scanner-based AOIs. We believe the main reason for our success is based on a close and trusting relationship with our customers. The modus team guarantees a fast response time for support and service questions. Modus is ISO-9000-certified, and all our systems include a CE Declaration of Conformity. Modus and its network of factory-trained support partners ensure competent customer support all around the globe.

Nettsted
W. DIMER GMBH

Tyskland

W. Dimer GmbH is an innovative medium-sized company with over 80 years' experience in the processing of cellulose wadding and foam processing. As a recognised partner among our clients, we develop and produce tailor-made product and packaging solutions made from cellulose wadding/tissue, PUR foams, PE foams, cross-linked PE foams, PA foams and cellular rubber. In addition, we manufacture compound foams, compound foam moulded parts, dental serviettes and absorbent pads for foodstuffs. As a cellulose wadding and foam specialist, we work for customers in a wide variety of industries. These include companies in the pharmaceutical sector, the food industry, medicine and medical engineering, mechanical engineering and tool manufacturing, the automotive industry, electronics industry, filtration technology, transport protection and the furniture industry. Our products are certified in accordance with ISO 9001 (quality management), ISO 14001 (environmental management) and ISO 15593 (food packaging and hygiene management).

Nettsted
MASCHINENFABRIK BERTHOLD HERMLE AG

Tyskland

Maschinenfabrik Berthold HERMLE AG is a German listed company with its head office in Gosheim in the district of Tuttlingen and is one of the leading manufacturers of milling machines. Globally there are more than 30000 machines in use, mainly at suppliers of medical technology, in the optical industry, in aviation, in the automotive industry and in motor sport. The most important components are developed and manufactured in Gosheim. HERMLE’s universal milling machines and machining centres are used for the machining of tools, moulds and series-produced parts. HERMLE produces small to medium-sized three to five-axis milling centres for a wide range of applications. Even machines for applications with increased demands on precision or machining volumes are manufactured. The different machine models are available with magazine extensions and a pallet changer. Furthermore, various handling systems are offered directly from the manufacturer. HERMLE is all about milling and achieving outstanding results. This is clearly demonstrated by the slogan "milling at its best". It stands for high-performance, highly innovative machining centres which have risen to a leading position nationally and internationally. It stands for a far-reaching and closely meshed sales and service network and for a worldwide presence.

Nettsted
DARBO PART

Tyskland

Selskapet DARBO PART, er en Distributør, som opererer i vedlikeholdsprodukter for bil bransjen. Det opererer også i car spare parts, Automotive - components and parts, og Automotive bransjene. Det har base i Hamburg, Tyskland.

Finn prisanslag for

Filtre

Resultater for

Automotive parts producer - Tyskland

Antall resultater

16 Bedrifter