Resultater for

Parts centre - Import eksport

28 Bedrifter

0 Produkter

THE PARTS CENTRE LTD

Storbritannia

Selskapet THE PARTS CENTRE LTD, som opererer i Industrikjøretøy bransjen. Det opererer også i Gaffeltrucker, Reservedeler til dieselmotorer, Nyttekjøretøy - deler og elektriske og elektroniske komponenter, Gaffeltrucker, forks, Reservedeler til dieselmotorer, og Nyttekjøretøy - deler og elektriske og elektroniske komponenter bransjene. Det har base i Newport, Storbritannia.
PARTS CENTRE

Storbritannia
PARTS CENTRE

Storbritannia
SCHNELL SPA

Italia

1962 – 2021. Years of challenges and goals. After almost 60 from being founded, Schnell has become a world leading company in the area of machines for: concrete reinforcement processing, electrowelded wire mesh production and production process management software. Founded in 1962, the company boasts a complete range of configurable machines, covered by more than 150 patents, produced in 40, 000 m² of production space in 4 factories all over the world, and more than 350 employees. Schnell heads up a major multinational industrial group. It operates in over 150 countries worldwide thanks to its 11 branches, more than 50 agents and dealers and a widespread after-sales service centre network. “Schnell Kundendienst” was set up in 2017 for the German market clients and is the latest after-sales technical assistance and spare parts centre, that operates both through a call centre and at the customers’ location.

Nettsted
C.R.C. - CENTRO RICAMBI CARRELLI - S.R.L.

Italia

C.R.C. Ricambi is a spare parts centre for forklifts, connectors, electrical components, brakes, up-down rollers, electric motors, mechanical parts, spare parts for hydraulic transmissions, motor reducers, drive wheels, seats, forklift accessories, leaf chains, rims and pulleys. Our company has a wide range of the best brands of forks for forklifts, pumps and hydraulic power packs, orbital and hydraulic motors, excavators, and much more. Its specialised staff available to its clientèle.

Nettsted

En side for firmaet ditt

Ser du dette? Dine potensielle kunder også! Bli med oss for å synes på europages.

Legg til firmaet mitt

SINUS GMBH

Tyskland

Sinus GmbH was founded in 2002 in Mönsheim, Swabia. In January 2012, Mr Bassem Bouhlel purchased Sinus GmbH. Since then, Mr Bouhlel has been the Managing Director of Sinus GmbH. In 2012, immediately after the business handover of Sinus GmbH, the company headquarters moved from Mönsheim to Kerpen. At the end of 2014, the company headquarters was relocated again – from Kerpen to Hamburg. That's when a storage area was also added to the office spaces, so that commissioning of orders could take place from a single source. Due to the growing goods turnover, the company headquarters was relocated in 2021 to the strategically optimised site in Bargteheide, where the storage area was expanded by more than 2000 m². We are thus able to provide our range in large volumes for our customers. Thanks to decades of experience in the area of filter technology, we are able to realise and supervise large-scale projects. In-house storage logistics allows us to respond flexibly and efficiently to customer requests. Our Shipping department is happy to undertake transport of their goods. We are motivated to process all requests and matters within 24 hours, and be by the customer's side all over the world as a partner in issues of filtration, end oilers, separators, motors and accessories. Sinus GmbH embodies growth through the ages and consistently high -Made in Germany- quality

Nettsted
METAL-TECH

Polen

Selskapet METAL-TECH, er en Tilvirker/ Produsent, som opererer i Ferdige produkter i metall bransjen. Det opererer også i Sliping av stål og metaller, Fresing av stål og metaller, Polering av stål og metaller, Grovsliping - maskinverktøy, Valsemaskiner for jernholdige metaller, Gjengestål, Krumming av stål og metaller, Maskinverktøy til krumming, og Bolter bransjene. Det har base i Gniezno, Polen.
ALZEYER WERKZEUGMASCHINEN SERVICE GMBH

Tyskland

Selskapet ALZEYER WERKZEUGMASCHINEN SERVICE GMBH, er en Forhandler, som opererer i Reparasjon av industrielt utstyr bransjen. Det opererer også i CNC router, CNC-controlled machine tools, CNC-controlled lathes, Spare parts for machining centres, Maintenance of machines and installations, Machining centre repairs, Spare parts for industry, Spare parts for lathes, og spare parts for site equipment bransjene. Det har base i Alzey, Tyskland.
JAPANESE CAR PARTS CENTRE

Storbritannia

Selskapet JAPANESE CAR PARTS CENTRE, som opererer i Kjøretøy - komponenter og elektriske og elektroniske deler bransjen. Det opererer også i Nyttekjøretøy - deler og elektriske og elektroniske komponenter, Kjøretøy - deler og elektriske og elektroniske komponenter, Nyttekjøretøy - deler og elektriske og elektroniske komponenter, og Kjøretøy - deler og elektriske og elektroniske komponenter bransjene. Det har base i Dewsbury, Storbritannia.
PRE WAR MG PARTS CENTRE

Storbritannia

Selskapet PRE WAR MG PARTS CENTRE, som opererer i Kjøretøy - komponenter og elektriske og elektroniske deler bransjen. Det opererer også i Nyttekjøretøy - deler og elektriske og elektroniske komponenter, Kjøretøy - deler og elektriske og elektroniske komponenter, Nyttekjøretøy - deler og elektriske og elektroniske komponenter, og Kjøretøy - deler og elektriske og elektroniske komponenter bransjene. Det har base i Melton Mowbray, Storbritannia.

PLASTIC PARTS CENTRE LTD

Storbritannia

Selskapet PLASTIC PARTS CENTRE LTD, er en Forhandler, som opererer i Skum av plast bransjen. Det opererer også i Skum av gummi, Skum av gummi og av plast, Skum av gummi, og Skum av gummi og av plast bransjene. Det har base i Stanley, Storbritannia.
PLUMB & PARTS CENTRE

Storbritannia

IBAG DEUTSCHLAND GMBH

Tyskland

The IBAG Group is one of the leading manufacturers of high-frequency engine spindles for use on machine tools, lathes and grinding machines. In addition to the sale and servicing of IBAG products and services, IBAG Germany specialises in the correct use of HSC technology. In our technology and demonstration centre at the Lindlar (DE) site, customer requirements can be implemented, analysed and optimised at full scale. Your employees will be trained in the use of HSC technology. At its Lindlar site, IBAG Germany produces the majority of the high-precision parts used in IBAG spindles. This guarantees constant quality from the purchase of materials to the final acceptance. Our in-house part production means that we can meet our customers needs and delivery wishes more quickly and efficiently.

Nettsted
REUTER TECHNOLOGIE GMBH

Tyskland

Vacuum soldering and a few other kinds of joining technology form the core strengths of REUTER TECHNOLOGIE. We develop and manufacture highly precise precision-engineered products that contain vacuum-sealed joints between metal, ceramic or crystalline materials. Our vast experience in vacuum soldering is incorporated in every part of the component development process. REUTER TECHNOLOGIE employs experienced materials experts, physicists and engineers as well as highly specialised skilled workers who all have access to – besides cutting edge mechanical production systems – a fully equipped test centre with testing laboratory and a clean room. REUTER TECHNOLOGIE products are not your average products. They are solutions derived from a wealth of ideas and experience in dealing with materials during the development, design and manufacturing stages. They are individually tailored to the functional, qualitative and economic requirements of the customer.

Nettsted
HENNIG GMBH

Tyskland

Our customer-specific Hennig products protect your machines against corrosion, deposits and impurities. Hennig production facilities are located in the USA, Germany, Czech Republic, France, Brazil, Great Britain, Bosnia-Herzegovina, Japan and South Korea. You will find our service centres all over the world. Hennig produces: Telescopic steel covers – all types of covers, horizontal and vertical, in almost any size. Bellows – sewn, sealed, etc. Adapted to your needs. Chip conveyors and filtration systems – chip conveyor tailored to customer requirements, CDF system with continuous self-cleaning. Machine casing – protection for man and machine. Roller covers and flexible cover aprons – protect guideways and exposed machine parts. Other products include: Flex-Protect systems, telescopic springs, wiper systems, pit covers, folding roof covers and roller door systems.

Nettsted
CONDETTA GMBH & CO. KG STORCK INDUSTRIE-SERVICE

Tyskland

CONDETTA is a subsidiary of August Storck KG in Halle (Westphalia) and an established specialist in functional product solutions for the processing foodstuffs industry. You can find basic ingredients from CONDETTA in numerous different foodstuffs. From basic raw materials to part compounds to individual complete solutions, CONDETTA produces powder mixtures from components which add taste, colour, sweetness and consistency. For over 70 years, companies in more than 50 countries have relied on raw materials expertise from CONDETTA. CONDETTA supports customers in developing a concept, procuring raw materials and along every step of development, providing technological consultation and a modern application centre with UHT pilot system for realistic developmental trials and results with scale-up capability. Thanks to organic, halal, kosher and VLOG quality, CONDETTA is the right contact partner for your innovative product ideas – for established companies and ambitious start-ups alike

Nettsted
FRANZ FISCHLER GMBH & CO. KG

Tyskland

For more than 50 years, plastic moulded parts and abrasives have been at the forefront of our company. In the course of this, maximum precision and a highly innovative spirit have come to distinguish our individual solutions and leading products. Our guiding principle is to put the customer at the centre of our business. Your satisfaction alone is the basis of our success. For the long term, across all products and services, our commitment to you always applies: We will work together with you as your partner. You will receive a tailored solution specially developed for you that suits your individual requirements. You will benefit from leading products and high profitability as we continually strive to improve our quality and throughput times. To save energy and reduce consumption of raw materials, we manufacture using state-of-the-art technology while continually optimising our processes and products.

Nettsted
HIAT GGMBH

Tyskland

The Hydrogen and Informatics Institute of Applied Technologies, or HIAT gGmbH, was founded in August 2002. Together with small companies and the industry, we provide a scientific basis for the development and optimisation of innovative products in the areas of fuel cells and hydrogen technology. HIAT is not dependent on companies or industry and, in addition to selling its own products, carries out research, development and technology transfer in relation to current and future-oriented topics via research projects initiated by the public and as part of industrial contracts. The new centre was set up on the site of the Research and Technology Park in Schwerin. HIAT strives to further expand its position in the area of hydrogen and fuel cell technology. The development of core components for fuel cells and electrolysis cells in particular is experiencing high demand and enjoying a positive market position.

Nettsted
BREYER GMBH MASCHINENFABRIK

Tyskland

Precision and experience are the right combination for satisfied customers. For us, precision is much more than dimensional accuracy. At BREYER, this term refers to accuracy in all areas. From precise planning, to outstanding production, quality and right through to on-time delivery. Precision at BREYER has a multidimensional nature due to its extensive experience: It is a true promise to our customers. BREYER is quality – made in Germany. The benefits for you of BREYER's manufacturing technology: In-house 3D programming, state-of-the-art turning and milling centre, ideal conditions for custom parts and small batches, special solutions are also possible, many decades of experience in plant engineering and just-in-time deliveries. The most important advantage offered by BREYER results from combining all manufacturing components – with just one contact, you get precision, expertise and reliability.

Nettsted
ZÜRN GMBH & CO. KG

Tyskland

With a company history spanning 60 years, Zürn GmbH & Co. KG is a particularly experienced manufacturer in the fields of machining centres, special machinery, tool holders for CNC lathes, tool holders and collet holders. The company was originally founded as a mechanical workshop for turned parts. Over the course of decades of continuous development work, Zürn has been able to expand its own product range, while the company has also had the opportunity to establish a global customer base as a precision manufacturing business. The range produced in Germany includes clamping nuts and bar pullers, CNC chucks and collet holders, VDI tool holders and precision tool holders. Zürn GmbH & Co. KG is also established on the international market and is competitive as it boasts state-of-the-art production conditions.

Nettsted

GEBR. JEHMLICH GMBH

Tyskland

JEHMLICH is the grinding technology specialist in customised solutions for the chemical, pharmaceutical, food, plastics and processing economies. We use our engineering expertise to develop and create cGMP-compliant industrial grinding plants, special grinding mills, pre-crushing plants and crushing machinery in our state-of-the-art production facilities, as well as compact- to industrial-scale homogenisation and separation technology. We have been implementing challenging projects for our customers worldwide for almost 100 years. Our services include: Process engineering analysis and consultation, extensive trial options in the technical centre, system solutions design, project scheduling and construction, manufacture, installation, commissioning and training, global service, maintenance and spare parts. We implement: GMP- and industrial-scale grinders, turnkey crushing plants, individual machines as components,

Nettsted
WIGTEC FISCHEREDER KG

Tyskland

Welcome to WigTec Fischereder KG, the pioneer in precision manufacturing and vacuum technology. As an experienced specialist in CNC machining and welded constructions, we provide tailor-made solutions that take the precision of your projects to a whole new level. Our expertise stretches from progressive vacuum components and soldering systems for diamonds to CNC turned parts made from titanium and stainless steel. Our WTH 200.2 high vacuum furnace revolutionises the soldering of diamonds and PCBN, facilitates flux-free processes and ensures maximum quality and reproducibility. Our extensive range of products includes custom-made articles for the mechanical engineering sector, from one-off items to series products, and serves numerous branches with precision-manufactured metal parts. Our products are manufactured on cutting-edge 5-axis machining centres ensuring precision and efficiency. In the field of TIG welding, we call on high-quality processes, in particular when welding aluminium, using cutting-edge technologies and highly-qualified professionals. WigTec Fischereder KG stands for quality, innovation and precision. With our in-depth knowledge of the sector and a strong focus on customer-specific solutions, we are your ideal partner for the challenges of tomorrow. Let's write your success stories together.

Nettsted
FORMHAND AUTOMATION GMBH

Tyskland

FORMHAND is a young mechanical engineering company that has set itself the goal of developing, manufacturing and selling intelligent handling solutions. Are you planning to automate your production but are faced with numerous challenges in your manufacturing and logistics process due to countless variables? Regardless of whether parts are moved, have a complex form, sit in different positions in the gripper or are of different sizes. The possible requirements are boundless. And so is the selection of handling technology solutions. Just imagine there were a solution that can grip, tighten or clamp components of different sizes, geometries and surface structures thanks to a single tool. FORMHAND technology combines universal, granulate-filled gripper cushions with an electrically produced volume flow, thereby replacing rigid handling solutions. Our adaptable gripper cushions offer huge potential for flexible and efficient processes. We provide our customers with tailor-made solutions and support them both in selecting the suitable Formhand products and in putting them into operation. In our test centre, we can examine your specific solution carefully and put it through its paces. Our agile team will be happy to advise you. Contact the unit directly.

Nettsted
V.B.N. SPA

Italia

Extrusion and co-extrusion of profiles and tubes in thermoplastic resins such as rigid and pliable PVC, ABS, polystyrene, polyethylene, polypropylene, polycarbonate, SAN and polyamide. This company designs and makes extrusion moulds and undertakes machining jobs on structural shapes and thermoplastic parts, in particular die cutting, special machining with a machining centre, welding and shaping.

Nettsted
BRUSCHI MICROMECCANICA SRL

Italia

Bruschi is a third-party manufacturer of high quality customised mechanical components made by turning. It is dedicated to operations on small parts, stainless steel, titanium and aluminium alloy turning, automatic CNC turning with tailstock and CNC plastics turning that can be moulded from bar stock, on horizontal and vertical machining centres with 5-axis continuous machining.

Nettsted
BRUSCHI MICROMECCANICA SRL

Italia

Bruschi is a third-party manufacturer of high quality customised mechanical components made by turning. It is dedicated to operations on small parts, stainless steel, titanium and aluminium alloy turning, automatic CNC turning with tailstock and CNC plastics turning that can be moulded from bar stock, on horizontal and vertical machining centres with 5-axis continuous machining.

Nettsted
MASCHINENFABRIK BERTHOLD HERMLE AG

Tyskland

Maschinenfabrik Berthold HERMLE AG is a German listed company with its head office in Gosheim in the district of Tuttlingen and is one of the leading manufacturers of milling machines. Globally there are more than 30000 machines in use, mainly at suppliers of medical technology, in the optical industry, in aviation, in the automotive industry and in motor sport. The most important components are developed and manufactured in Gosheim. HERMLE’s universal milling machines and machining centres are used for the machining of tools, moulds and series-produced parts. HERMLE produces small to medium-sized three to five-axis milling centres for a wide range of applications. Even machines for applications with increased demands on precision or machining volumes are manufactured. The different machine models are available with magazine extensions and a pallet changer. Furthermore, various handling systems are offered directly from the manufacturer. HERMLE is all about milling and achieving outstanding results. This is clearly demonstrated by the slogan "milling at its best". It stands for high-performance, highly innovative machining centres which have risen to a leading position nationally and internationally. It stands for a far-reaching and closely meshed sales and service network and for a worldwide presence.

Nettsted
C-METAL

Belgia

C-METAL – QUALITY WITH NO COMPROMISES It all starts with an idea: the idea of developing a mixer lining that is more stable and durable than the original parts from the manufacturer. Driven by this thought, Louis Clos founds C-Metal GmbH in 1988 with headquarters in St. Vith in eastern Belgium, thus laying the foundation for the company’s current success. With constant commitment and the vision of a future-oriented plant, founder Louis Clos invests year after year in the development of new mixer linings and transforms the GmbH into a stock corporation as early as 1992. The part-time tinkering turns into a demanding full-time commitment. In 2004, due to the variety of products and space requirements, the company builds another distribution centre with direct motorway access and creates spacious workplaces with space for careful storage. Since 2007, C-METAL has been actively supported by Georg Schwall in all areas and has ensured that every order is processed quickly and smoothly. In the search for a successor, the next cornerstone for the future was laid in 2017: with the takeover by PSF Mechanik GmbH from Luxembourg, represented by Fernando Leyens, the company expanded in 2018 with a new 1, 200 m2 workshop in Courtil, Belgium. Since then, the wear-resistant steel parts have been manufactured in our own factory using the most modern machines and are delivered worldwide.

Nettsted

Finn prisanslag for

Filtre

Resultater for

Parts centre - Import eksport

Antall resultater

28 Bedrifter